Custom Action Figures Thread
-
- Ronin
- Posts: 9
- Joined: Thu Nov 17, 2011 5:12 pm
Re: Custom Action Figures Thread
I made this one recently. Ended up selling it.
http://www.figurerealm.com/customfigure ... w&id=93425
http://www.figurerealm.com/customfigure ... w&id=93425
- SpaceG92
- Keizer
- Posts: 9400
- Joined: Fri Dec 28, 2012 1:33 am
- Location: Southern California
- Contact:
Re: Custom Action Figures Thread
Oooooh - me likey. Dunno why you seamed the shoulder though - I'll assume aesthetic. Still though, looks pretty good! Hopefully it went to a good home~VazeroK wrote:I made this one recently. Ended up selling it.
http://www.figurerealm.com/customfigure ... w&id=93425
How did you go about painting the joints and disassembly btw? Been wanting to customize the NECA for a while now and i've been wanting to paint over the hinge joints but i'm afraid of paint getting into the cracks. I heard some people just paint over it via air brush and it works itself out.
-
- Ronin
- Posts: 9
- Joined: Thu Nov 17, 2011 5:12 pm
Re: Custom Action Figures Thread
Thanks! I had to putty over the shoulders because the GMK arms seemed a bit bulbous without it.SpaceG92 wrote:Oooooh - me likey. Dunno why you seamed the shoulder though - I'll assume aesthetic. Still though, looks pretty good! Hopefully it went to a good home~VazeroK wrote:I made this one recently. Ended up selling it.
http://www.figurerealm.com/customfigure ... w&id=93425
How did you go about painting the joints and disassembly btw? Been wanting to customize the NECA for a while now and i've been wanting to paint over the hinge joints but i'm afraid of paint getting into the cracks. I heard some people just paint over it via air brush and it works itself out.
As for the joints, I would just paint them over in all positions with enough paint so it would leak through into the seams. This was all done with dry brushing Tamiya acrylic. Disassembly and reassembly was done with a hair dryer. Just keep it going on each part until it become soft enough to remove.
- godzilla1541
- EDF Instructor
- Posts: 2247
- Joined: Mon Jan 12, 2015 8:19 pm
- Location: grand terrace ca
Re: Custom Action Figures Thread
Made a Shin Godzilla form 3 and form 1 out of hot glue(because I’m a cheap fuck) to go with the little 3 in Form 2 I just got. And now I have all the forms in my collection
Moo
my youtube: https://www.youtube.com/channel/UCkbqUm ... DC98dHE72w
my deviantart http://godzilla154.deviantart.com/
my youtube: https://www.youtube.com/channel/UCkbqUm ... DC98dHE72w
my deviantart http://godzilla154.deviantart.com/
- TheRadness
- Monarch Researcher
- Posts: 390
- Joined: Sat Jul 19, 2014 2:38 pm
- SpaceG92
- Keizer
- Posts: 9400
- Joined: Fri Dec 28, 2012 1:33 am
- Location: Southern California
- Contact:
Re: Custom Action Figures Thread
Indeed! I like the result as well. The use of gunmetal on the windows is a nice touch (or silver?) looks silver lol. The matte black is a good touch as well.TheRadness wrote:Painted some buildings recently, happy with em!
https://instagram.com/p/Beghwxwh0AJ/
Mmmm - not really feeling these. A for effort, but you could have bought the Bandai forms and the Gashapon (should be in scale) for probably about the same.godzilla1541 wrote:Made a Shin Godzilla form 3 and form 1 out of hot glue(because I’m a cheap fuck) to go with the little 3 in Form 2 I just got. And now I have all the forms in my collection ]
- godzilla1541
- EDF Instructor
- Posts: 2247
- Joined: Mon Jan 12, 2015 8:19 pm
- Location: grand terrace ca
Re: Custom Action Figures Thread
Gashapon is a little two small for my taste and there are no form 3 Figures that would scale well with the Neca Shin. This is one of the only representations of a character that I truly care about with the scaling.SpaceG92 wrote:Mmmm - not really feeling these. A for effort, but you could have bought the Bandai forms and the Gashapon (should be in scale) for probably about the same.godzilla1541 wrote:Made a Shin Godzilla form 3 and form 1 out of hot glue(because I’m a cheap fuck) to go with the little 3 in Form 2 I just got. And now I have all the forms in my collection ]
Moo
my youtube: https://www.youtube.com/channel/UCkbqUm ... DC98dHE72w
my deviantart http://godzilla154.deviantart.com/
my youtube: https://www.youtube.com/channel/UCkbqUm ... DC98dHE72w
my deviantart http://godzilla154.deviantart.com/
- Mac Daddy MM
- Xilien Halfling
- Posts: 5050
- Joined: Thu Jan 05, 2017 5:27 pm
Re: Custom Action Figures Thread
The Gasaphon Form 3 actually would scale well with the NECA.godzilla1541 wrote:Gashapon is a little two small for my taste and there are no form 3 Figures that would scale well with the Neca Shin. This is one of the only representations of a character that I truly care about with the scaling.SpaceG92 wrote:Mmmm - not really feeling these. A for effort, but you could have bought the Bandai forms and the Gashapon (should be in scale) for probably about the same.godzilla1541 wrote:Made a Shin Godzilla form 3 and form 1 out of hot glue(because I’m a cheap skreeonk) to go with the little 3 in Form 2 I just got. And now I have all the forms in my collection ]
Quote of the Year:
plasmabeam wrote: ↑Tue Dec 05, 2023 3:03 am Hear me out on this. What if Godzilla is actually Suko’s father? In GvK when Godzilla defeated Kong and they were roaring at each other, what if Godzilla inseminated Kong at that moment and that’s why they were screaming?
- TheRadness
- Monarch Researcher
- Posts: 390
- Joined: Sat Jul 19, 2014 2:38 pm
Re: Custom Action Figures Thread
Thanks!SpaceG92 wrote:Indeed! I like the result as well. The use of gunmetal on the windows is a nice touch (or silver?) looks silver lol. The matte black is a good touch asTheRadness wrote:Painted some buildings recently, happy with em!
https://instagram.com/p/Beghwxwh0AJ/
It is silver, this is the kaiju body and paint method. Check him out if ya haven’t!
https://www.instagram.com/kaiju_body_and_paint
- godzilla1541
- EDF Instructor
- Posts: 2247
- Joined: Mon Jan 12, 2015 8:19 pm
- Location: grand terrace ca
Re: Custom Action Figures Thread
Custom Bandai Creations King Caesar
Moo
my youtube: https://www.youtube.com/channel/UCkbqUm ... DC98dHE72w
my deviantart http://godzilla154.deviantart.com/
my youtube: https://www.youtube.com/channel/UCkbqUm ... DC98dHE72w
my deviantart http://godzilla154.deviantart.com/
- SpaceG92
- Keizer
- Posts: 9400
- Joined: Fri Dec 28, 2012 1:33 am
- Location: Southern California
- Contact:
Re: Custom Action Figures Thread
Points docked for not using King Caesar's songgodzilla1541 wrote:Custom Bandai Creations King Caesar https://www.youtube.com/watch?v=eWdj4ZMebkU
- Destorogoji
- G-Grasper
- Posts: 1234
- Joined: Tue Dec 13, 2016 2:40 pm
- Location: Toluca, Mexico
Re: Custom Action Figures Thread
Cool work.godzilla1541 wrote:Custom Bandai Creations King Caesar [youttch?v=eWdj4ZMebkU[/youtube]
What are you using as balljoints?
Added in 4 minutes 46 seconds:
Also, I'm starting a Hedorah custom project using a Marvel Legends generic body as my base, I'll post some updates in a few days.
Last edited by Destorogoji on Mon Feb 05, 2018 8:30 pm, edited 1 time in total.
Here's my Instagram, I post photos of my figures, customs and sometimes other stuff:
https://www.instagram.com/buruno.98/
https://www.instagram.com/buruno.98/
- SpaceG92
- Keizer
- Posts: 9400
- Joined: Fri Dec 28, 2012 1:33 am
- Location: Southern California
- Contact:
Re: Custom Action Figures Thread
IIRC Bionicle pieces.Destorogoji wrote:Cool work.godzilla1541 wrote:Custom Bandai Creations King Caesar [youttch?v=eWdj4ZMebkU[/youtube]
What are you using as balljoints?
Eh? Curious to see how you go about doing that. Pictures of the progress as you do it to help out others ?Destorogoji wrote:Also, I'm starting a Hedorah custom project using a Marvel Legends generic body as my base, I'll post some updates in a few days.
Last edited by SpaceG92 on Mon Feb 05, 2018 9:47 pm, edited 1 time in total.
- Destorogoji
- G-Grasper
- Posts: 1234
- Joined: Tue Dec 13, 2016 2:40 pm
- Location: Toluca, Mexico
Re: Custom Action Figures Thread
Thanks! I'm sure that will help me eventually.SpaceG92 wrote:IIRC Bionicle pieces.
Sure! I will keep you guys updated.SpaceG92 wrote:Eh? Curious to see how you go about doing that. Pictures of the progress as you do it to help out others ?
Here's my Instagram, I post photos of my figures, customs and sometimes other stuff:
https://www.instagram.com/buruno.98/
https://www.instagram.com/buruno.98/
- SpaceG92
- Keizer
- Posts: 9400
- Joined: Fri Dec 28, 2012 1:33 am
- Location: Southern California
- Contact:
Re: Custom Action Figures Thread
Destorogoji wrote:Thanks! I'm sure that will help me eventually.SpaceG92 wrote:IIRC Bionicle pieces.Sure! I will keep you guys updated.SpaceG92 wrote:Eh? Curious to see how you go about doing that. Pictures of the progress as you do it to help out others ?
Now that I have a stable job again - I might get back into the custom figure game. That's been on my wishlist for a bit.
Added in 14 minutes 28 seconds:
Legit LegitVazeroK wrote:As for the joints, I would just paint them over in all positions with enough paint so it would leak through into the seams. This was all done with dry brushing Tamiya acrylic. Disassembly and reassembly was done with a hair dryer. Just keep it going on each part until it become soft enough to remove.
I'm planning on painting via Airbrush - and atomized paint is different then liquid Just worried about chipping in the hinge joints...I don't think it would be an issue. If its a tight fit, I could just sand the inbetween a tad to create a bigger gap. Takes some effort but I guess it could be done.
Say what you may about Deadzilla but that Kiryu is some decent work.
5:40 in
https://www.youtube.com/watch?v=7jHoMCZed-s
Just straight up jammed a Mc Farlin Spartan in there. I mean - it's not the first time someone has done that with a Mc Farlin. Apparently, they are favored well in the customizer fan base. Been thinking about doing the same or just doing something similar to what 1541 did and filling the hollow vinyl with xx material (expanding foam) and installing the joints myself. That been my endgame for a while now and now I can actually afford to make a mistake....or 2. I think I can finally attempt this.
Last edited by SpaceG92 on Mon Feb 05, 2018 10:46 pm, edited 1 time in total.
- godzilla1541
- EDF Instructor
- Posts: 2247
- Joined: Mon Jan 12, 2015 8:19 pm
- Location: grand terrace ca
Re: Custom Action Figures Thread
I’ve seen that video many times and it’s what got me interested in adding joints to mostly static figures.SpaceG92 wrote: Say what you may about Deadzilla but that Kiryu is some decent work.
5:40 in
https://www.youtube.com/watch?v=7jHoMCZed-s
Just straight up jammed a Mc Farlin Spartan in there. I mean - it's not the first time someone has done that with a Mc Farlin. Apparently, they are favored well in the customizer fan base. Been thinking about doing the same or just doing something similar to what 1541 did and filling the hollow vinyl with xx material (expanding foam) and installing the joints myself. That been my endgame for a while now and now I can actually afford to make a mistake....or 2. I think I can finally attempt this.
I think filling in empty spaces and adding joints from there is easier than trying to fit it over an already existing figure. Me being cheap I decided to use the least costly things available to me, which where old hero factory sets and some hot glue. In the future I hope to obtain some revoltech joints and use those instead. But you being older and having access to money, can probably add joints much better than me.
...
So for my next custom I’m gonna try and save up to get the Neca 84 and the bootleg Bandai 84 for a pretty obvious custom. A more accurate Neca 1984! I was gonna do it with the Neca 84 and 94 but I realized that the bootleg will probably have more accurate spines and details that I could use. I probably won’t be able to actually do this for like a month as the Neca 84 is hard to get for cheap, and the bootleg is also kinda expensive(well to me at least) and I don’t have the money at the moment. But I do want to do that custom eventually.
Added in 55 seconds:
FUCK. I totally forgot.SpaceG92 wrote:Points docked for not using King Caesar's songgodzilla1541 wrote:Custom Bandai Creations King Caesar https://www.youtube.com/watch?v=eWdj4ZMebkU
Last edited by godzilla1541 on Mon Feb 05, 2018 11:21 pm, edited 1 time in total.
Moo
my youtube: https://www.youtube.com/channel/UCkbqUm ... DC98dHE72w
my deviantart http://godzilla154.deviantart.com/
my youtube: https://www.youtube.com/channel/UCkbqUm ... DC98dHE72w
my deviantart http://godzilla154.deviantart.com/
- SpaceG92
- Keizer
- Posts: 9400
- Joined: Fri Dec 28, 2012 1:33 am
- Location: Southern California
- Contact:
Re: Custom Action Figures Thread
Not gunna blame yah. The bootleg did go up in price. At one point it was around 16 bucks. I'm also pretty sure the entirety of the fan base will crucify you for cannibalizing a memorial box figure. At that point it might be cheaper to recast one - if you play your cards right and really play those Hobby Lobby coupons.godzilla1541 wrote:So for my next custom I’m gonna try and save up to get the Neca 84 and the bootleg Bandai 84 for a pretty obvious custom. A more accurate Neca 1984! I was gonna do it with the Neca 84 and 94 but I realized that the bootleg will probably have more accurate spines and details that I could use. I probably won’t be able to actually do this for like a month as the Neca 84 is hard to get for cheap, and the bootleg is also kinda expensive(well to me at least) and I don’t have the money at the moment. But I do want to do that custom eventually.
Last edited by SpaceG92 on Mon Feb 05, 2018 11:32 pm, edited 1 time in total.
- godzilla1541
- EDF Instructor
- Posts: 2247
- Joined: Mon Jan 12, 2015 8:19 pm
- Location: grand terrace ca
Re: Custom Action Figures Thread
Theres the pink spine variant on eBay for around $30 so I’m hoping to score that one. I’m gonna get it for the hands, arms, spines,feet,(basically the problem spots on the Neca ), and Maybe some parts of the tail.Also. It’s a bootleg I don’t think anyone is gonna care if I cut it up. People on my instagram already know what’s up when they see my figures getting cut apart anywaySpaceG92 wrote:Not gunna blame yah. The bootleg did go up in price. At one point it was around 16 bucks. I'm also pretty sure the entirety of the fan base will crucify you for cannibalizing a memorial box figure. At that point it might be cheaper to recast one - if you play your cards right and really play those Hobby Lobby coupons.godzilla1541 wrote:So for my next custom I’m gonna try and save up to get the Neca 84 and the bootleg Bandai 84 for a pretty obvious custom. A more accurate Neca 1984! I was gonna do it with the Neca 84 and 94 but I realized that the bootleg will probably have more accurate spines and details that I could use. I probably won’t be able to actually do this for like a month as the Neca 84 is hard to get for cheap, and the bootleg is also kinda expensive(well to me at least) and I don’t have the money at the moment. But I do want to do that custom eventually.
Moo
my youtube: https://www.youtube.com/channel/UCkbqUm ... DC98dHE72w
my deviantart http://godzilla154.deviantart.com/
my youtube: https://www.youtube.com/channel/UCkbqUm ... DC98dHE72w
my deviantart http://godzilla154.deviantart.com/
- Destorogoji
- G-Grasper
- Posts: 1234
- Joined: Tue Dec 13, 2016 2:40 pm
- Location: Toluca, Mexico
Re: Custom Action Figures Thread
My custom Hedorah it's done! I'll leave a link for the process and a few pics. There are things I would like to upgrade eventually, but for now, I'm very happy with how it turned out, specially with the eyes.
https://www.instagram.com/p/Be624f8H1MA/
https://www.instagram.com/p/Be624f8H1MA/
Here's my Instagram, I post photos of my figures, customs and sometimes other stuff:
https://www.instagram.com/buruno.98/
https://www.instagram.com/buruno.98/
- godzilla1541
- EDF Instructor
- Posts: 2247
- Joined: Mon Jan 12, 2015 8:19 pm
- Location: grand terrace ca
Re: Custom Action Figures Thread
So I lied about the 84 being my next custom. Custom Bandai Japan MechaGodzilla 75 basically the SHMA but with more range in the joints. It only lacks neck, feet articulation and an crunch
Moo
my youtube: https://www.youtube.com/channel/UCkbqUm ... DC98dHE72w
my deviantart http://godzilla154.deviantart.com/
my youtube: https://www.youtube.com/channel/UCkbqUm ... DC98dHE72w
my deviantart http://godzilla154.deviantart.com/